Suno Audio Quality Checker
Check a downloaded Suno WAV or MP3 for peak levels, samples at full scale and quiet sections. See the duration, sample rate and channel count.
This file is decoded in your browser and is not uploaded.
The song is already a file. That file is what gets measured.
After a download from Suno or anywhere else, the useful questions are whether this WAV or MP3 is slammed and whether the silences are longer than you wanted. A link has no samples.
Pasting a Suno share link does not start anything. Drop in the WAV or MP3 and you get sample rate, channel count, and peak. The song is in the file, not in the link.
The peak is the largest sample, which shows how close the loudest moment sits to full scale. A lower peak leaves room to stack more tracks. A peak already on the ceiling means the next layer needs headroom first. Mixing can continue on zer.ai.
Samples at an absolute value of 0.999 or more are counted. A large count means a stretch is against the ceiling. One touch can be nearly inaudible as a fault. A long note can sound rough. The count is the scale. That stretch still needs a listen.
The gap at the top, a breath between sections, and a fade at the end show up as quiet stretches. Loop the whole file and a long gap becomes a stall at the join. Trim it, keep it, or leave it as a breath, depending on whether you are publishing or looping.
This is not LUFS, and the result is not a loudness standard. Platforms that want integrated loudness need a different measurement. Use this page to see that the file is not slammed for a long time and that no surprise silence is hiding in it. The check stays on this device, up to 40 MB, and the file is not uploaded.
Hitting the ceiling does not automatically kill the track
The numbers describe the file. Whether it is listenable, and whether you should publish it, still depends on hearing that stretch.
Before you publish, hear the slammed section, especially long notes and sibilance. Touching the ceiling does not force another export. It is worth hearing before the file goes out, rather than trusting the count alone.
This page does not rewrite the file and does not export a new WAV. Leave after the peak and the quiet stretches. Whether a join clicks is the loop checker. Turning audio into a repeating WAV is the loop maker.
How to use it
- Open a WAV or MP3 you already have. Pasting only a Suno link does not start, because the song is in the file.
- Read the peak and how many samples hit full scale. Those stretches are worth another listen.
- See where the quiet parts are. Before you publish or loop, decide whether the gaps should stay.
Limits
- This is a level check, not a LUFS meter and not a true-peak meter. The page does not label the result as a loudness standard.
- Full scale means a sample at an absolute value of 0.999 or more. A large count means a stretch is against the ceiling. Whether that sounds like distortion is a question for another listen.
- The file stays in the browser. WAV or MP3, up to 40 MB.
FAQ
Does this download the song from Suno?
No. Open the file you already saved. This page measures the samples in that file and does not fetch the song from Suno.
Why is there no LUFS?
The reading is how high the samples go, how often they hit the ceiling, and where the file is quiet. That is not an ITU loudness measurement, so it is not labeled LUFS.